Main performance Of 5.08 Pcb Pluggable Terminal Block

NingBo HongYi 5.08 Pcb Pluggable Terminal Block is a common electrical connection device with the following main features:

1. Rated voltage:NingBo HongYi  5.08 Pluggable Terminal Block usually have a certain rated voltage, usually in the range of 250V to 600V. This means that it can withstand voltages within the rated voltage range, terminal block 6 position ensuring the safe operation of the circuit.

2. Conducting resistance: NingBo HongYi  5.08 Pluggable Terminal Block  is an indicator for evaluating their conductivity performance. A lower on resistance ensures that the current transmitted in the circuit can smoothly pass through the terminal connections, 6 position terminal block reducing current loss and heat.

3. Vibration resistance: NingBo HongYi  5.08 Pluggable Terminal Block  should usually have a certain degree of vibration resistance, 6 pin terminal block connector which can maintain reliable electrical connections in vibration environments to prevent loosening or disconnection under vibration or impact conditions.

4. Rated current: NingBo HongYi  5.08 Pluggable Terminal Block usually have a certain rated current, usually in the range of 10A to 20A. This means that it can withstand current loads within the rated current range, 6 pin screw terminal ensuring that the circuit can operate normally.

5. Insulation resistance: The insulation resistance of plug-in terminals is an important indicator for evaluating their insulation performance. A higher insulation resistance means that plug-in terminals can effectively isolate the circuit during the connection process, 5 pin terminal connector preventing the occurrence of circuit short circuits and breakdown phenomena.

6. Temperature resistance: NingBo HongYi  5.08 Pluggable Terminal Block usually have certain temperature resistance and can work normally under a certain range of temperature conditions. This ensures that the terminals can adapt to different working environments and temperature changes.

These performance indicators are usually tested and evaluated according to relevant standards and specifications to ensure the reliability, safety, and performance of plug-in terminals meet the requirements. The specific performance parameters may vary depending on the manufacturer and product model, so when choosing to use 5 position terminal block， relevant technical specifications and certification documents should be referred to.